LSD 53-310 Mini Pocket Retriever LBS

LSD 85-124 Wet Noodle Magnetic In-Wall Retrieval System The Wet Noodle is an in-wall retrieval system which allows you to fish wire through walls with ease. The 85-124 features an 18" telescoping pocket retriever that you can use to snag wire and pull it through with its hooked tip. You also get a 24" flexible, insulated retriever (the Wet Noodle) that features magnets on both ends. On one end of the Noodle is a 1/4" Neodymium magnet which means that it has some serious pulling power. The last thing you'll get with this is 10ft. of lightweight ball chain with a stop-ring to be used with the pocket retriever. No matter if you're doing a retro install or just pulling wire for a new zone; this will become a trusted tool in your DIY installation arsenal.

LSD 82-110 Grabbit Mini 10ft Fiberglass Telescoping Pole  The 82-100 Grabbit is a lightweight fiberglass pole that you can use in limited access areas and false ceilings to push or pull wire. This pole is telescoping which means that it can be extended by pulling the tip out to a maximum of 10'. Because of its fiberglass design; the pole will friction lock when extended so you don't have to worry about it retracting while pushing wire through a space. Also, because of its fiberglass design; the pole is non-conductive so you won't have to worry about getting electrocuted if you somehow contact a live wire. The pole's Z-Tip can be used to grab wire and because of the bladed edges it can grab onto the wire's insulation. When retracted; the Grabbit measures in at 22"

LSD EZS Self Adjusting Wire Stripper (53-210)    The EasyStripper™ is a self-adjusting wire stripper that will easily strip wire from 10-26 gauge. The jaws of the stripper will clamp down on the wire jacket and cut it. It will then strip the outer-jacket from the wire in the same motion. No more lining up hole sizes for your wire gauge. The jaws on this tool are replaceable if you wear it out.  This also features a wire cutter and a connector crimp tool in the handle itself. This is an all-in-one wire tool and will replace a few tools in your toolbox.