DSC PowerSeries PG9935 PowerG 915Mhz Wireless Shock Detector

The PG9984P is the highest quality PowerG motion sensor, featuring dual-band PIR and microwave motion detection, giving you double the false alarm protection at up to 33ft. It also includes True motion detection as well as an 88lbs pet immunity limit. DSC PowerSeries PG9984P PowerG 915Mhz Wireless Dual Tech Motion Detector w/ Pet Immunity The PG9984P is a Dual Band motion detector that will detect movement on the PIR spectrum and includes K-band microwave detection as well as a backup so that you get the best in detection without the normal false alarms that you might experience with a regular PIR motion detector.  This motion detector also uses temperature compensation technology that will adjust the sensitivity settings automatically so that it can tell the actual human body temperature from the surrounding area where it is located. That means that if the room temperature closely matches that of the human body; the...

The PG9936 is a standard wireless smoke and heat detector with a 135-degree heat limit. This model also features a built-in sounder in the event that the siren cannot be heard. Both the smoke and heat must be active at all times. DSC PG9936 PowerG Wireless Smoke and Heat Detector The DSC PG9936 is a wireless PowerG smoke and heat detector that can be used with the DSC PowerSeries NEO systems as well as the Qolsys IQ Panel 4 systems.  The PG9936 works on the 915 MHz frequency, can be mounted on a wall or ceiling, and comes with the hardware to do so. Just like every PowerG device; the PG9936 features multi-channel frequency hopping to help prevent frequency blocking and interference. It also uses 128-bit AES encryption to provide protection against analysis tools and digital attacks. Another preventive measure this contains is a back tamper in case someone tries to remove...

The PG9922 is a wireless PowerG glass break sensor with a reliable 20ft of range. In most cases, the range can reach up to 25-30ft, but 20ft is recommended. The PG9922 is effective for covering multiple windows in a room so you do not need individual shock sensors on your windows. DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector The DSC PG9922 is a 2-way wireless glass break detector that will set off a burglary condition in your NEO security panel if the sound of breaking glass is picked up by the sensor. This is also supervised and checks in with the panel occasionally to let the system know that all is well. This also features a tamper switch to prevent a thief from tampering with it causing an alarm condition.   Specifications: Dimensions 80x108x43mm (3.1x4.2x1.7in)Battery Life for 4 years (typical use)Battery Type 3V CR123A Lithium batteryWeight (including battery) 130g...