AlarmSystemStore.com BBB Business Review

Alarm.com ADC-SWM150 Smart Water Valve and Meter

$599.95

Quick Overview
In Stock
Add to Wishlist

Alarm.com ADC-SWM150 Smart Water Valve and Meter 

The ADC-SWM150 is an ingenious addition to your z-wave smart home accessories. This smart water valve + meter is capable of monitoring the main water line coming into your home for leaks and usage throughout the home. Using Alarm.com's z-wave, you can open or close the valve inside using the Alarm.com app. Rules can be set in place to automatically shut the valve in the event that a leak is detected and can even be paired with a water sensor to automatically shut of the main water supply if that sensor is tripped.

Installation is fairly simple; the ADC-SWM150 ties directly into the main water supply of your home. Along with the main meter and valve unit, the SWM150 has a control unit that connects to the main valve, and from there has a transformer that plugs into your wall. Once installed, it can be paired to your z-wave hub using "add device" in your Alarm.com app. Once connected it allows full water flow monitoring and automatically detects leaks allowing you to monitor the water usage in your home from anywhere. 

NOTE: Additional parts required: Installation will require additional fittings to connect the ends of the valve to the pipe. The type of fittings needed will depend on the existing pipe size, material, and threading type as well as applicable plumbing codes.

IMPORTANT: Use of the ADC-SWM150 is dependent on a Commercial or Residential Interactive plan, WITH automation enabled, from Alarm.com. 

ADC-SWM150 Installation manual
ADC-SWM150 Data Sheet

IN THE BOX: 

-ADC-SWM150 Control Unit
-Brass valve and meter
-Plastic enclosure
-Actuator
-Mounting plate
-Drywall anchors & screws (x2)
-Cable ties (x3)
-Power adapter
-Installation guide

SPECS:

Power - 100-240 VAC (50/60 Hz)
Operating Temperature - 14°F to 185°F (-10°C to 85°C)
Operating Humidity - 0% to 95% non-condensing
Requirements - For indoor use only, Alarm.com system, Expansion tank for water heater
Valve - Size: 1" - Threads: Male NPT
Control Unit Dimensions - 2.75 x 4.0 x 1.25” (6.99 x 10.2 x 3.18 cm)
Meter and Valve Dimensions (with Enclosure) - 11 x 5.75 x 3.75" (27.9 x 14.6 x 9.53 cm)
Actuator and Valve Dimensions - 4.5 x 2.0 x 3.75" (11.43 x 5.08 x 9.53 cm)
Maximum Compatible Pipe Size - 1.25" (3.175 cm)
Power Supply Cable Length - 19.7’ (6 m)
Plumbing Certifications - ICC-ES-PMG (compliance with NSF 61 and NSF 372), Massachusetts Accepted Plumbing Products Registry

 

QUESTIONS & ANSWERS

Ask a Question
  • Will this allow irrigation bypass for sprinklers?

    Yes, the first few days of operation, the SWM150 only watches your water consumption to figure out what your typical usage looks like. If your sprinkler system is on a set timed pattern the unit will learn that during those times a lot of water will be used. However, if you change the timing of the sprinklers kicking on though you might need to recsync the unit.

  • What are the compatible with water sensors that can be paired to automatically shut of the main water supply if that sensor is tripped?

    When using this device, any flood sensor can be used as long as your alarm system is connected to Alarm.com service. The sensors do not pair with the water valve, but rather with the system, and the Alarm.com automation options are what trigger the valve to shut off.

  • How come I can shut off this valve manually and through the water sensors, but not on my app?

    You can shut it off via the app if you have an alarm.com plan that includes automation.

  • Can it be installed vertically or horizontal?

    Yes it can. Orientation does not affect the functioning of this product.

  • Is it using the home wifi or zwave via cellular

    It communicates via Zwave to a compatible alarm system.

  • Where can I get this in canada

    We ship to Canada. I've no idea where you could buy it locally though.