DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector

The PG9984P is the highest quality PowerG motion sensor, featuring dual-band PIR and microwave motion detection, giving you double the false alarm protection at up to 33ft. It also includes True motion detection as well as an 88lbs pet immunity limit. DSC PowerSeries PG9984P PowerG 915Mhz Wireless Dual Tech Motion Detector w/ Pet Immunity The PG9984P is a Dual Band motion detector that will detect movement on the PIR spectrum and includes K-band microwave detection as well as a backup so that you get the best in detection without the normal false alarms that you might experience with a regular PIR motion detector.  This motion detector also uses temperature compensation technology that will adjust the sensitivity settings automatically so that it can tell the actual human body temperature from the surrounding area where it is located. That means that if the room temperature closely matches that of the human body; the...

The PG9936 is a standard wireless smoke and heat detector with a 135-degree heat limit. This model also features a built-in sounder in the event that the siren cannot be heard. Both the smoke and heat must be active at all times. DSC PG9936 PowerG Wireless Smoke and Heat Detector The DSC PG9936 is a wireless PowerG smoke and heat detector that can be used with the DSC PowerSeries NEO systems as well as the Qolsys IQ Panel 4 systems.  The PG9936 works on the 915 MHz frequency, can be mounted on a wall or ceiling, and comes with the hardware to do so. Just like every PowerG device; the PG9936 features multi-channel frequency hopping to help prevent frequency blocking and interference. It also uses 128-bit AES encryption to provide protection against analysis tools and digital attacks. Another preventive measure this contains is a back tamper in case someone tries to remove...

The PG9914 is your base-level PowerG motion sensor. Using passive infrared, this device monitors the change in heat signatures to catch motion at up to 39ft. Also includes pet immunity feature for animals up to 85lbs. For a dual-tech PowerG motion, check out the PG9984. DSC PG9914 Wireless PowerG Digital Pet-Immune PIR Motion Detector - *Latest firmware* There are a couple of firmware versions of this motion floating around. This affects compatibility with some systems. The version we offer here is the latest version with full PowerG compatibility. The DSC PG9914 wireless PowerG motion detector is a wireless motion detector for use with any DSC system that uses PowerG wireless such as their Iotega and PowerSeries Neo alarm systems. It is a dual-purpose detector because it not only monitors for movement events but also features a built-in temperature sensor as well. The PG9914 can send the room temperature readout to the...